Carefusion Alaris® 8100 LVP Infusion Pumps
Save Up to 80% on Carefusion Alaris® 8100 LVP Infusion Pumps
Buy or rent pre-owned, recertified Carefusion Alaris® 8100 LVP Infusion Pump you need today. All pre-owned medical equipment is patient ready equipment and is covered by an OEM matched warranty.
Product Specifications
Dimensions:
3.3”W x 8.9”H x 5.5”D
Critical Volume:
The maximum over infusion which can occur in the event of a single fault condition is 0.6 mL.
Environmental Conditions:
Operating: Temperature Range: 41 to 104 degrees Fahrenheit Relative Humidity: 20 to 90% Atmospheric Pressure: 525 to 4560 mmHg Storage/Transport: Temperature Range: -4 to 104 degrees Fahrenheit Relative Humidity: 5 to 85% Atmospheric Pressure: 375 to 760 mmHg
Electrical Classification:
Class 1, Type CF Defibrillator Proof
Fluid Ingress Protection:
IPX1, Drip Proof
Infusion of Air, Means to Protect Patient From:
Ultrasonic Air-in-Line Detection Maximum single bolus size = selectable 50, 75, or 250 microliters nominal (500 microliters in anesthesia mode)
Infusion Pressure, Maximum
683 mmHg
KVO Rate:
Factory Defult Setting is 1.0 mL/h if set rate is 1.0 mL/h or above; or set rate, if rate is 0.9 mL/h or below
KVO Selection Range:
KVO rate can be set in System Configuration from 0.1-20 mL/h in 0.1 mL/h increments
Occlusion Alarm Thresholds:
Pump Mode: 525 mmHg at rates > 30 mL/h, varying level based on rate and patient back-pressure at rates < 30 mL/h Selectable Mode: User selected from 50 to 525 mmHg in 25mmHg increments
Operating Principle:
Positive Displacement