Baxter Flo-Gard 6301 Dual Channel Infusion Pumps

Specifications

Weight:
8.1 kg (17.9 lbs)

Dimensions:
33 cm W × 13 cm D × 29 cm H (13″ W × 5.1″ D × 11.4″ H)

Administration Set:
Baxter designated sets

Keep Vein Open (KVO) Rate: 
5 mL/hr or programmed rate, whichever is less

Nurse Call:
Available through the COMMUNICATIONS PORT

Battery:
12 volt, 3.2 ampere-hour sealed lead-acid

Battery Life:
Approximately 6 hours with one pump running at a rate from 1 to 1400 mL/hr
Approximately 4 hours with both pumps running at rates from 1 to 1400 mL/hr

Battery Recharge:
8 hours for more than 80% recharge

AC Power Requirements:
110/120 V, 60 Hz

Power Cord:
2.9 m (9.5 ft) long, with Hospital Grade plug

Fuse:
0.8 A, 250 V, SB, 5.2 mm (13/64 in.) × 20 mm (25/32 in.)

Leakage Current:
Less than 50 microamps (using UL-544 specified test methods)

Flow Rate Range:
Primary program for each pump: 1.0–99.9 mL/hr in 0.1 mL increments or 1–1999 mL/hr in 1 mL increments. Upper limit can be reduced by authorized service personnel.
Secondary program: 1.0–99.9 mL/hr in 0.1 mL increments or 1–999 mL/hr in 1 mL increments, subject to the upper limit that also applies to the primary program.

VTBI Range:
1.0–99.9 mL in 0.1 mL increments or 1–9999 mL for both primary and secondary of each pump. Upper limit can be reduced by authorized service personnel

Air-in-Line Detection:
Factory set to NORM, which causes the device to alarm on air bubbles approximately 75 μL or larger. The MIN setting causes the device to alarm on air bubbles approximately 50 μL or larger