Baxter Flo-Gard 6200 Infusion Pumps

Save Up to 80% on Baxter Flo-Gard 6200 Infusion Pumps

Buy or rent pre-owned, recertified Baxter Flo-Gard 6200 you need today. All pre-owned medical equipment is patient ready equipment and is covered by an OEM matched warranty.


9.5” W x 6” D x 11”H

14 lbs

Leakage Current:
Less than 50 microamps

0.5A, 250V, SB, 1/4in x 1-1/4in

Power Cord:
8 ft long, hospital grade plug

AC Power Requirements:
110/120V, 60Hz

Battery Recharge:
16 hours to recharge to 80% of capacity

Battery Life:
5 hours on fully charged batteries, at 125 mL/hr

Nurse Call:
Optional: an installation kit is require

KVO Rate:
5 mL/hr or programmed rate, whichever is less

Volume Range:
1-9999 mL for primary and secondary

Flow Rate Range:
1-999 mL/hr in 1 mL increments, for primary and secondary

Air-In-Line Detection:
Air bubbles approximately 50 microliters or larger

Output Pressure:
Initial distal occlusion alarm pressure is approximately 5 to 7 psi

Administration Set:
Baxter standard administration sets with s suffix