Plum A+3™ Triple Channel Infusion Systems

Save Up to 80% on Plum A+3™ Triple Channel Infusion Systems

Buy or rent pre-owned, recertified Plum A+3™ Triple Channel Infusion Systems you need today. All pre-owned medical equipment is patient ready equipment and is covered by an OEM matched warranty.


Pump Line:
Hospira dedicated Plum™ A+ tubing

Pump Type:
General Infusion

Approx. 19″ h x 15″ w x 14″ d (including pole clamp, barcode wand holder, and power cord)

Approx. 28 lbs. (with 3 batteries)

Battery Life:
Approx. 6 hours at 125 mL/hr, or deliver 500 mL at 126 mL/hr or greater on oneline

Power Requirements:
120 V, 50-60 Hz, 150 VA

Recharge Time:
Approx. 6 hours with one line operating at 125 mL/hr

Volume Range:
0.1 to 99.9 mL (in 0.1 mL increments), 100 to 9999 mL (in mL increments)

Delivery Rate Accuracy:
± 5% (1-999 mL/hr), ± 10% (0.1-0.9 mL/hr)

Delivery Rates:
Primary: 0.1 mL/hr Minimum, 999 mL/hr Maximum
Secondary: 0.1 mL/hr Minimum, 999 mL/hr Maximum
Concurrent: 0.5 mL (per line) Minimum, 500 mL/hr (cumulative) Maximum

Delivery Units:
mL/hr, mcg/kg/min, mcg/min, mcg/kg/hr, cg/hr, mg/min, mg/kg/hr, mg/hr, ng/kg/min, g/hr, mEq/hr,
Million units/hr, units/min, units/hr, units/kg/hr, units/kg/min, mmol/min, mmol/hr

System Alarms:
Air-in-Line, Air-in-Line Backpriming, Low Battery, Occlusion, Turn to Run, Flow Detector, VTBI
Complete or Dose End

Occlusion Alarm Pressure:
1-15 psig (default 6 psig)

KVO Rate:
1.`0 mL/hr or the last primary delivery rate, whichever is less